Adhesive Aluminum Anchor
Adhesive Aluminum Anchor
Couldn't load pickup availability
After mounting the anchors and letting them cure for 3 weeks before attaching the xl Awning for the first time, one of them came unattached within 30 minutes, when a relatively mild gust of wind pulled it right off!
Made attaching the Moon to my ‘21 Wrangler super easy! Best mod I’ve made this year.
Thanks for your positive feedback, Blake! We love your Jeep + MoonShade set up.
-The Moon CX Team
Can’t wait to install and test
Based on the hardness when drilling, the material appears to be stainless steel, not aluminum.
Anchors are Amazing!
So far they have kept our MoonShade shading without blowing off!
I have a 2025 Solis PX poptop. I'd almost given up finding a mount I didn't have to drill holes for! The Solis has a slight curve to the roof so little was working but these are perfect. They adhere to the base of poptop and don't interfere with the tops operations even with my moonshade set up. Plus I can reach them with a small step stool
About Adhesive Aluminum Anchor
These 3mm Aluminum anchors securely mount to any reasonably flat surface, even textured fiberglass, such as those found on many pop-up campers, trailers, conversion vans, and Jeep Wranglers.
Our super-sticky 3M VHB backed anchors work where suction cups and magnets won’t, forming a semi-permanent (they won’t come off until you remove them, basically) anchor that you can clip your MoonShade or Moonshade XL corner carabiners to. They are also designed to work with a strut pole for mounting along the short edge.
These anchors work great for tall vehicles, vans, or RVs without roof rails. The anchor height allows for easier access to anchor your MoonShade or MoonShade XL with our tall-connect cords, so once you set them into place, you don’t need access to the roof to set up or take down your MoonShade.
Product Specs
| Material | 3mm Aluminum |
|---|---|
| Total Height | 1.7" |
| Total Length | 4" |
| Total Width | 3" |
| Adhesive Area Width: | 3" |
| Adhesive Area Length | 2.25" |
| Weight: | 3.2oz (90g) |
Not Sure if you need these?
Answer a few basic questions about your setup to get hardware suggestions or browse all anchor solutions.
